NEO TAO X3

TAO arm rests but even better

The only manufacturers to offer the combined option of supports for greater integration and the ability to mount a central bottle cage in an easy and practical way.

It includes ARAI foam with velcro, four M5 and four M6 screws.

From €289.00

Safe

Ergonomic

Aerodynamic

lightweight

Inclined plane, better support

Tetsuo exclusive feature.

Designing a flat support from the elbow is easy and intuitive but it is not correct, the arm is simply not flat.

After meny analysis and prototyping, we have reached the maximum comfort that supports can provide.

A simple angle of 7 degrees from the center of the support improves the contact surface by 100%, and increases comfort.

Anchor point

1mm thick stainless steel plate

In addition to providing rigidity to the assembly, it prevents the screw head from wearing out the carbon fiber.

Being made of stainless steel, galvanic corrosion that appears between carbon and aluminum is avoided.

Although its density is higher than that of aluminum, making it heavier, it is considerably stiffer.

Support surface

Velcro foam specifically formulated for triathlon.

The chemical composition had to fulfill two purposes: Being non-slip and closed-cell, it does not absorb moisture.

Although it can withstand temperatures of more than 90 degrees, its continuous exposure to the sun is not recommended.

It includes velcro both in the foam and in the carbon fiber for easy replacement or adjustment of the position of the supports.

Measurement plan

Check that your supports are compatible with you and your bike

Mounting

Tetsuo's team will solve all doubts that you may have during assembly.

Remove your couplings

Depending on the bike you use, the assembly may vary, but you always start by removing the supports that you have mounted.

Mount the Supports

The new hole pattern of the supports allows a high range of adjustability. Screw them directly to the handlebars or to one of our wedges.

Adjust the system

Once placed in your optimal position, simply place the foam with Velcro on the support.

¡Ready!

Fabrication process

After years of experience working for the main Formula 1 teams, we have the experience and the necessary equipment for the highest level carbon fiber manufacturing.

Join the waiting list We will inform you when the product is back in stock. Please leave a valid email address below.