Triathlon Arm Rests KAIZEN
Kaizen
IMPROVE YOU AERODYNAMICS AND ERGONOMICS.
The latest version of supports that have already proven their effectiveness but now with a superior ergonomics and rigidity.
Safe
Ergonomic
Aerodynamic
lightweight
First point of contact
Fully 3D printed using polyamide 12 filament with carbon fiber powder
It is one of the most rigid and durable materials that can be printed in 3D.
It withstands temperatures of more than 160 degrees without deforming and stands out for its high resistance to chemical agents.
Thanks to its rough surface it is completely non-slip.
Punto de anclaje
1mm thick stainless steel plate
In addition to providing rigidity to the assembly, it prevents the screw head from wearing out the carbon fiber.
Being made of stainless steel, galvanic corrosion that appears between carbon and aluminum is avoided.
Although its density is higher than that of aluminum, making it heavier, it is considerably stiffer.
Support surface
Velcro foam specifically formulated for triathlon.
The chemical composition had to fulfill two purposes: Being non-slip and closed-cell, it does not absorb moisture.
Although it can withstand temperatures of more than 90 degrees, its continuous exposure to the sun is not recommended.
It includes velcro both in the foam and in the carbon fiber for easy replacement or adjustment of the position of the supports.
Measurement plan
Verify that the supports are compatible with you and your bike.
Mounting
Tetsuo's team will solve all doubts that you may have during assembly.
Remove your couplings
Depending on the bike you use, the assembly may vary, but you always start by removing both bars and supports.
Mount the Kaizen
The hole pattern of the supports allows a high range of adjustability. Screw them directly to the handlebars or to one of our wedges.
Adjust the system
Once placed in your optimal position, pass the change cable through the tip and under the foam through the center of the velcro. Clever!
Fabrication process
After years of experience working for the main Formula 1 teams, we have the experience and the necessary equipment for the highest level carbon fiber manufacturing.
