Compatibility · Masamune

Fits your bike.
And fits you.

Check before you buy whether the Masamune fits your bike, your arms and your shifters.

34bike models listed
23brands
15dedicated plates
140mmelbow spacing (Masamune)

01 · Finder

What does your bike need?

Pick your brand and model: we tell you if it mounts directly or which plate you need.

Bike not listed? Send us photos of your cockpit with the model and we will suggest a solution.

How your bike holds the armrests decides whether you mount directly or with a plate.

SYSTEM A

Dual Stack

Each armrest bolts onto its own stack. On many models the Masamune fixes directly to them through its slots; some need a plate. Check it in the finder.

Dual Stack diagram: distance between holes 95 to 169 mm and slots every 15 mm
  • Distance between holes (X)95 – 169 mm
  • Distance Y15 mm
  • Slot spacing15 mm
  • Recommended torque4 – 7 Nm
SYSTEM B

Central Stack

The bike has a single central mount. You need the plate for your model (sold separately). If you change bikes, you only change the plate.

Central Stack diagram with plate
  • PlatesBlack anodised 6061 aluminium
  • Load capacityUp to 1,000 kg
  • Reach adjustment with plate0 to +25 mm*
  • Tip deflection0.18 mm

Central Stack

Change bikes,
not cockpits.

With Central Stack the plate is the only bike-specific part. If you change bikes, your Masamune stays: you only change the plate.

View plates →
MASAMUNEstays BIKE A PLATE BIKE B PLATE Your current bikeYour new bike you change bikes

*Except the Trek (disc) and BMC Speedmachine plates and the Profile Design A2 adaptor, which do not change reach.

Compare them with your current setup or with your bike fitter.

Masamune

From ¥177,300
Masamune: lengths of 300, 403 and 429 mm and overall width of 234 mm

Length, wedge angle and overall width, measured on the Masamune.

Profile · Length

Length at 0° (neutral grip)403 mm
Length at 30° (extended grip)429 mm

Elbows and width

Elbow spacing140 mm
Overall width234 mm

Dual Stack mounting

Min. distance between holes95 mm
Max. distance between holes169 mm
Slot spacing15 mm
Distance Y15 mm
Torque4 – 7 Nm

Fit

Tilt10°, 15° or 20°
Reach with K / Z wedges0 to +60 / 0 to −60 mm
GripInterchangeable · wrist angle 0–30°
ShiftersShimano / SRAM CLICS · SRAM BLIPS

Material and standard

BodyFull UD carbon fibre
Weight (carbon plate)249 g
SafetyISO 4210-5
In the boxMasamune, grip, 2 foams, 4 M6 bolts with washers

Configure your Masamune

K wedges move reach forward and Z wedges move it back. Each adaptor adds 5°, up to 20°.

Tetsuo K wedges

K Wedges

To gain reach. They come at 10° as standard.

Reach0 to +60 mm
Tilt10° · 15° · 20°
MaterialAnodised 7075 aluminium
LoadUp to 500 kg each
From ¥25,800
Tetsuo Z wedges

Z Wedges

To shorten reach. They come at 10° as standard.

Reach0 to −60 mm
Tilt10° · 15° · 20°
MaterialAnodised 7075 aluminium
LoadUp to 500 kg each
From ¥25,800
K / Z wedge adaptor

K / Z Adaptor

Adds 5° to your K or Z wedges. One set takes you to 15°; two, to 20°.

15°1 set · ¥4,100
20°2 sets · ¥8,100
MaterialAnodised 7075 aluminium
View adaptor
TILT 10° · K or Z wedge 15° · wedge + 1 adaptor 20° · wedge + 2 adaptors REACH 0 −60 mm+60 mm Z wedges · move backK wedges · move forward

Plate, adaptors, K wedges, cap and body: this is how the Masamune stacks up.

Exploded view of the Masamune with K wedges

Masamune with K wedges

  1. 01Shifters and grip
  2. 02Garmin/Wahoo holder and bottle adaptor
  3. 03Masamune body
  4. 04Wedge cap
  5. 0510° K wedges
  6. 065° adaptors
  7. 07Plate
4 – 7Nm

Recommended torque. Have your position set by a professional.

Grips for your shifters, holders and spares for the Tetsuo system.

Mono grip

Mono grip · CLICS

For Shimano / SRAM CLICS shifters. Single mount.

¥8,100
Double grip

Double grip · CLICS

For Shimano / SRAM CLICS shifters. Double mount.

¥8,100
Mono grip SRAM BLIPS

Mono / Double grip · BLIPS

Dedicated versions for SRAM BLIPS shifters.

¥8,100
Mono and double grip pack

Pack Mono + Double

Both grips, CLICS or BLIPS.

¥12,900
Garmin/Wahoo holder

Garmin / Wahoo holder

To mount your Garmin or Wahoo on the cockpit. Adaptor included.

¥8,100
Bottle holder with adjustable angle

Adjustable bottle holder

Bottle holder with adjustable angle to keep your bottle within reach in the aero position.

¥14,600
Masamune foams

Replacement foams

Moisture-resistant Arai EVA with hook-and-loop, to refresh your Masamune foams.

¥4,900
Tetsuo plates

All plates

15 dedicated plates in black anodised 6061 aluminium.

View plates

Also: bottle holder bar for 2 bottles (fits standard mounts; requires the bottle holder), BTA wedge to raise the angle or height of the between-the-arms bottle, K wedge caps, bolts, barrel nuts and M5/M6 countersunk nuts. View spare parts.

Can’t find your answer? Send us your bike model and photos of your cockpit.

Contact support

Compatibility

Is the Masamune compatible with my bike?
The Masamune is compatible with many Dual Stack bikes. Some models need an additional plate. Look it up in the finder or write to us with your bike details.
What is a plate and when do I need one?
It is the 6061 aluminium part that adapts the Masamune to the models that need it, such as Central Stack bikes. It is sold separately. In the Masamune configurator it is added automatically when you choose your bike.
If I change bikes, do I need another Masamune?
No. You only need to swap the plate for the one for your new bike.
My bike is not on the list. What should I do?
Use the contact form (topic “Compatibility”) with your bike model and detailed photos of your stacks. We will suggest a solution.

Fit

What is the difference between K and Z wedges?
Both are 7075 aluminium and come at 10°. K wedges increase reach from 0 to +60 mm; Z wedges reduce it from 0 to −60 mm. With the K / Z adaptors you go to 15° or 20°.
What if the 140 mm elbow spacing doesn’t feel comfortable?
Do the paper test before buying and, if in doubt, check with a bike fitter from our network. You can also write to us so we can look at your case.
Which grip do I need for my shifters?
For Shimano or SRAM CLICS, the Mono grip, the Double grip or the pack with both. For SRAM BLIPS there are dedicated mono and double versions. The grip is interchangeable.
Can I mount a bike computer or a bottle?
Yes. The Garmin/Wahoo holder and the bottle adaptor are part of the Masamune system and are sold separately. With the bottle holder bar you can carry 2 bottles.

Assembly and purchase

Is it hard to assemble?
No. Follow our assembly guide step by step. For the best result, have your position set by a professional bike fitter from our network.
What torque should I tighten the bolts to?
The recommended torque for the Masamune is 4 to 7 Nm.
Is it safe?
The Masamune meets the ISO 4210-5 standard. Follow the assembly instructions and have your position set by a professional.
What if it doesn’t fit in the end?
You have 30 days of free returns from delivery, with the product unused and in its original packaging. Check the conditions and contact us to arrange it.
What warranty does it have?
2-year warranty against manufacturing defects. See the warranty policy.

08 · Support

Still have questions? We’ll sort it out.

Send us your bike model and a few photos of your cockpit. Our team will tell you exactly what you need.